Busy weeks

But one after the other – after the successful start into the season with the win of the Ghost Masters LIII, I was very motivated for the next challenge. The Munich Open is always a match with a lot of very challenging stages and so was this one also. I had a very good match with a lot of nearly perfect runs with good times and solid hits and was able to win seven of the 20 stages. But unfortunately, I also had three or four totally screwed ones. This time, that were one or two screwed too much – Gerald from Austria shot clean and beat my by 2,35%. How far away we both have been can be seen by the distance to the third place – third had 84,97%. That was a tough challenge…as always, when we two are shooting the same match. Next time, it will be the Europeans….

Munich Open 2016 Results Munich Open 2016 Stageresults

Only two weeks later, I travelled to the Netherlands to shoot the European Steelchallenge. One of my favorite matches in the year. Unfortunately, I have no time and opportunity to practice for that kind of match. Because of that, I decided to start also in Division Standard Pistol with my Standard Revolver to use this as a practice run. So I started my match on Sunday morning in Standard Pistol. It worked quite nice and I finsihed with 86.xx. Could have been a bit better but I had to take a mike on five to go which cost me three seconds penalty. But who cares, I was focused on Standard and Open Revolver. After Standard Pistol, I shot a secod run with my 929, now as Standard Revolver. It went a bit better as the first one but not as good as last year. 85.xx was a second slower than 2015. But I was quite happy with that. Finally I started with the 627 Open Revo – this run was very nice and I improved my last years time by 3 seconds to 78.xx

When it came to the price giving ceremony, I was VERY surprised when they called my name for Standard Pistol podium – 3rd place with the wheelgun! Awesome! But it even went better – I won also both Revolver divisions. And finally – even Standard Team was a victory for the team “Steel Monkeys” with Werner and Frants! Two Revolvers, three starts – four medals! What a blast!

2016_European_Steel_Challenge_results 2016_European_Steel_Challenge_stageresults

Motivated by that result, I shot the third match in this row – the Infinity Open. Always one of the highlights in my calendar. As last year, I shot the match together with the Team Infinity guys – that was just perfect – besides having lots of fun together by kidding each other, these guys are all shooting a very fast gun which rocked me to do it just the same. The stage this year have been filled with challenges. Nearly everywhere, there was a bobbing or swinging target Sometimes plates, sometimes paper targets. What I liked most, was the fact, that also at this match (like the Munich Open some weeks before), the long courses were designed that you had to have fast feets – the last years, there was a trend towards more static, long distance and precision shooting, in between, it seems, that “running and gunning” and the need for a physical fitness is coming back again. I like! In the end, I made it again and finished by a comfortable lead of 10% 😀

2016_Infinity_Open_results 2016_Infinity_Open_stageresults

Now it´s time for a break of Revolver shooting – IPSC Rifle nationals are the next match on my schedule! Stay tuned!

Top Wheelgunner Trophy Wintergames 2015 Babenhausen

Against this, for the TWT the committee decided, that within the actual season 2014/2014, the TWT will keep the 6-reload6 rule for Standard. Anyway, I didn’t care for that, I decided that this year, I´ll support the 6+ Minor ruling. I REALLY LIKE the 929 and how it works and performs in a match! It´s so much more fun for me to shoot 8 instead of 6. MUCH more dynamically! I shot a very good match, except from some minor mistakes “between the ears”. Only once, I was very lucky – there was a stage, where the briefing was, that for one sequence, you have to hold/pull a rope with STRONG hand while shooting weak hand – I messed it up and shot strong holding weak – three PTs usually – but not, if the score keeper misses to note the time and when realizing it, the RO had already zeroed the timer for the next stage – Reshoot! 😎

My real “highlight” was this stage for me:

After the beep, step on an activator pad either left or right side. This pad activates the target sequence as described. First string visible for 7 seconds. Invisible 2 seconds, visible again 4 seconds etc. (see picture).

Stage 6 Wintergames TWT
Stage 6 Wintergames TWT

My plan was, to get the first 8 targets within the first sequence, reload again and finish the rest 4 targets in the second string. Tough but doable. The risk is to screw the reload by rushing and pushing to hard or to earn mikes by shooting just fast and not aiming… But finally my plan worked and I shot an incredible hifactor of 7,58! I guess, that was my highest hit factor I ever shot with a Revolver!

this is the Video of this stage:

httpv://youtu.be/Sn9Vs6R2GiI

…and the results:

TWT Wintergames 2015 overall

TWT Wintergames 2015 Stage

929 – erfolgreiche Wettkampfpremiere!

The 6 Stages were all build very fluid and fast. What a fun to shoot them with the 8 rounder! It was so dynamic and fast! I got familiar with the 929 very fast. Hit the reloads and the targets and the steel – it was a blast! The load with the 139grs Geco encapsulated bullet and 3,8grs Reload Swiss RS12 worked perfect! All that made me win by a 20% lead! 😀

More of that, please… 😉

BM 2015 Nordbaden Production/Revolver Overall

BM 2015 Nordbaden Production/Revolver Stages

929 – neue Messungen

IMG_4845.PNG

Reload Swiss RS12 seems to be a little bit more constant than the RS20 in my applications and subjective,  it shoots a little bit more comfortable. It’s also a bit cleaner and has less residues. Perfect! So I guess, I’ll add one or two tenth of a grain to the 3.6 RS12 to be safe above minor level. The 115grs load is something for the Steelchallenge. Also here, I’ll ad a bit to get 110PF. Precision is fine already! the 929 is a nice Revolver and makes fun. But I’m thinking of getting the barrel stub cut. It’s useless for me and I don’t need to mount the comp and this would reduce weight a bit and would make it a bit more handy. Also the underlug could be overworked a bit to reduce weight. We’ll see… 😉